VB Fences logoVB Fences 📞 (757) 703-7030
Cedar privacy fence with cap and trim, built by VB Fences in Virginia Beach

Home / Fence Installation

Fence installation in Hampton Roads

Fence installation, priced before you ask.

Wood, vinyl, aluminum, and chain link, with the gates that go with them. We walk your line, pull the permit, set every post 27 inches deep, and leave the yard clean.

★★★★★ 4.7 on 108 Google reviewsLicensed & insured18-month workmanship warrantyPermits & HOA packages handled

Prices

What a new fence costs, on the page.

Installed, per linear foot, from our current price book. The final number is in writing after we walk your line, and it holds unless the scope of work changes.

Wood privacy, 6 ft

$35.13 per ft

Dog-ear privacy, pressure-treated.

Wood fencing

Vinyl privacy

$41.00 per ft and up

Low-maintenance privacy and semi-privacy.

Vinyl fencing

Chain link, residential

$15.99 to $19.99 per ft

By height. Pet yards, utility, perimeter.

Chain link fencing

Chain link, commercial 6 ft

$21.99 to $27.99 per ft

Galvanized or black, slats and gates available.

Commercial fencing

Walk gates from $545 and double drive gates from $1,143, installed. Aluminum is quoted per project. Every install carries our 18-month workmanship warranty, in writing on the quote, on top of the manufacturer's warranty on the material.

A typical backyard

150 feet and a gate, worked out.

Most Hampton Roads backyards take 120 to 180 feet of fence and one walk gate. Here is the same yard in each material, at the posted rates.

150 ft + 1 walk gateInstalled
6-ft wood privacy, dog-earabout $5,815
Vinyl privacyfrom about $6,695
Chain link, residentialfrom about $2,944

Math: 150 ft × the per-foot rate, plus a $545 walk gate. Old-fence removal, stumps, and grade change the number, and we name each one on the written quote before you sign.

Install day, start to finish

What happens between the estimate and the last gate latch.

The same sequence on every job, residential or commercial, forty feet or four hundred. Most backyards are built in one to three days once the material is on site.

1

Walk the line, price it in writing →

Free. We measure, mark the gates, and flag the stump, the low spot, and the easement before they reach your invoice.

2

Permit, HOA, and Virginia 811

We pull the zoning permit or certificate where the city wants one, submit your HOA package, and have the underground lines marked before a single hole is dug.

3

Old fence out, posts in

Tear-out and haul-off when it is in the scope. Posts go 27 inches deep in concrete, full length, never cut to fake a level line.

4

Rails, boards, gates

Three staggered rails so no two seams line up, pickets run to the line, gates hung on heavy hinges with a steel corner kit so they don't sag.

5

Clean yard, final walk

Scraps, concrete bags, and dirt leave with us. We walk the finished line with you, and the 18-month workmanship warranty starts that day.

Permits by city

Who needs a permit, and how tall you can go.

Read from each city's own rules. We pull the permit or certificate and submit the HOA package as part of the job.

CityPermitHeight
Virginia Beach$61 zoning permit for any fence within 30 feet of a public right-of-way, with a sealed survey. Deeper on an interior lot: none.4 ft in the front setback; up to 8 ft behind it on an interior lot.
NorfolkFree Zoning Certificate on corner and through lots only.4 ft in front; 6 ft side and rear; 8 ft only along a non-residential district.
ChesapeakeHeight and placement set by district under Zoning Ordinance § 14-201.4 ft in front; 6 ft residential side and rear; 8 ft only in business and multi-family districts with zoning approval.

Pool barriers need a building permit in every city. Sources: Virginia Beach Fence and Wall Bulletin (rev. Nov. 2025), Norfolk Fence Regulations brochure (Feb. 2024), Chesapeake Zoning Ordinance § 14-201 (amended May 2024). Corner lots carry their own street-side limits; each city page has them.

What we install

New lines, replacements, and the gates in them.

New fence

A first fence on a new lot or an open yard: layout, permit, posts, and gates from bare ground. Residential and commercial.

Replacement

The old fence comes out and leaves with us, and the new one goes in on the same line, usually the same visit. If only a few sections are gone, repair may be the better spend, and we will say so.

Gates

Walk gates from $545 and double drive gates from $1,143, installed, in every material. Arched tops, arbors, and lattice toppers on request.

Free estimate

Your line, walked and priced in writing.

Pick an hour online and we come to you. (757) 703-7030 rings the people who build the fence.

Questions

Fence installation questions.

How much does fence installation cost in Virginia Beach?

Installed, per linear foot: 6-foot wood privacy $35.13, vinyl privacy $41.00 and up, residential chain link $15.99 to $19.99, commercial 6-foot chain link $21.99 to $27.99. Walk gates from $545 and double drive gates from $1,143. A 150-foot backyard in wood with one walk gate is about $5,815. Estimates are free, and the written price holds unless the scope of work changes.

How long does a fence installation take?

Most residential backyards are built in one to three days once the material is on site. Permits, HOA approval, and Virginia 811 marking come first, and the written quote carries a scheduling window so you know the dates before you sign.

Do you remove and haul off my old fence?

Yes, when it is in the scope. Tear-out and haul-off are priced as their own line on the quote, so you can see what they cost.

Do I need a permit for a new fence?

It depends on the city and the lot. Virginia Beach requires a $61 zoning permit within 30 feet of a public right-of-way, Norfolk a free Zoning Certificate on corner and through lots, and Chesapeake sets height and placement under § 14-201. Pool barriers need a building permit everywhere. We pull it as part of the job; the Virginia Beach, Norfolk, and Chesapeake pages have each city's rules.

What warranty comes with a new fence?

An 18-month workmanship warranty, in writing on the quote, on top of the manufacturer's warranty on the material.

How deep do you set fence posts?

27 inches in concrete, full length. Level comes from the hole, not from cutting the post tops.

Call (757) 703-7030Free estimate